LS 400 V8-4.0L (1UZ-FE) (1990)
(c) Using a SST and socket wrench, remove the pressure plate. SST 07112-76060
(d) Remove the shims from the pressure plate.
2. REMOVE ROTOR
(a) Using a SST, remove the snap ring. SST 07114-84020
(b) Using a plastic hammer, tap the rotor off the shaft.
NOTICE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR
(a) Disconnect the stator lead wire from the compressor housing.