LS 400 V8-4.0L (1UZ-FE) (1990)
Control Assembly: Service and Repair
REMOVE RADIO AND A/C CONTROL ASSEMBLY
1. Remove upper console panel
a. Pry out the rear side of the panel.
b. Pull the panel backwards to remove it.
2. Remove front ash receptacle.
Note: Perform this operation only with the ash receptacle fully closed.
a. Pull the front ash receptacle.
b. Disconnect the connector.
3. Remove #2 register
a. Using a screwdriver, remove the register.
Note: Tape the screwdriver tip before use.
4. remove radio with a/c control assembly
a. Remove four screws and radio with the A/C control assembly.
5. Remove air conditioner control assembly from radio