LS 400 V8-4.0L (1UZ-FE) (1990)
a. Using a screw driver, pry loose the two clips and pull out the max cool damper control plates.
b. Remove the screw and disconnect the connector.
c. Remove two screws and the servomotor.
7. REMOVE AIR MIX DAMPER CONTROL SERVOMOTOR ASSEMBLY
a. Remove the control cable.
b. Using a screw driver pry loose the clip and pull out the air mix damper control plate.
c. Disconnect the connector.
d. Remove four screws and the servomotor assembly.
8. REMOVE VENT AIR DUCT