LS 400 V8-4.0L (1UZ-FE) (1990)
Receiver Dryer: Service and Repair
REMOVAL
1. Remove the headlight on vehicle's right side.
2. Recover refrigerant in refrigeration system.
3. Remove two liquid tubes from receiver.
Remove the two bolts and both the tubes from the receiver.
NOTE: Cap the open fittings immediately to keep moisture out of the system.
4. Remove receiver from receiver holder.
Remove the bolt,then remove the receiver from the receiver holder.
Installation of Receiver
1. Install receiver in receiver holder.
Install the receiver in the receiver holder with the one bolt.