LS 400 V8-4.0L (1UZ-FE) (1990)
W/ Air suspension -0° 45' ± 45'
Left-right error: 30' or less
3. ADJUST CAMBER AND TOE-IN
(a) Measure the length of the No. 1 and No. 2 lower suspension arms as shown in the illustration. Check if the right side and left side lengths are
equal.
Fig. 11 Rear Camber & Toe-in Adjusting Cam
If not, adjust the length of the arm by turning the adjusting cam until the left and right side lengths are equal.
(b) Measure the camber and toe-in.
If the camber and toe-in are still not within the specification, adjust the camber and toe-in with the adjusting cam.