LS 400 V8-4.0L (1UZ-FE) (1990)
Distributor: Description and Operation
Ignition System Components
PURPOSE
The igniters physically fires the ignition coils in response to the ECU's signal. Computers generally produce low amperage signals as outputs,
much lower than necessary to fire the coil.
LOCATION
Mounted to the right side strut tower.
CONSTRUCTION
The igniters consists of a power transistor and circuitry to provide a tachometer output.
OPERATION
The igniters are essentially electronic relays. They receive a "trigger" from the ECU and responds by turning a higher amperage current to the
ignition coils on and off. Each time a spark is produced an ignition confirmation (IGF) signal is sent to the ECU.