LS 400 V8-4.0L (1UZ-FE) (1990)
Cold Start Injector: Technical Service Bulletins
Type EE1 and ED2 Connectors - New Design
ELECTRICAL
009
AUGUST 9, 1991
LS400
Title NEW DESIGN TYPE EE1 AND ED2 CONNECTORS
A design change has been made to the EE1 (cold start injector) and ED2 (ignition coil # 1) connectors on LS400.
Connector:
Wires lead to the following:
EE1
Cold Start Injector
ED2
Ignition Coil # 1
PRODUCTION EFFECTIVE:
From Frame Number:
P/D:
JT8UF11E*L0036128
5/90
PART NUMBER INFORMATION:
When servicing EE1 or ED2 connectors, replace the following parts as a set only on vehicles built before the production change of 5/90.
P/N
DESCRIPTION
90980-11137
Connector, male 2P 090II waterproof
90980-11038
Connector, female 2P 090II waterproof
82998-12430
Terminal, male for 090II
82998-12440
Terminal, female for 090II
Refer to the wire harness repair kit manual for replacement procedures.