LS 400 V8-4.0L (1UZ-FE) (1990)
Throttle Cable/Linkage: Technical Service Bulletins
A/T - Removal Precautions
TRANSMISSION & CLUTCH 005 11-30-90 LS400
Title AUTOMATIC TRANSMISSION REMOVAL
The following components located under the engine hood must be disconnected prior to the removal of the Automatic Transmission for repairs or
replacement.
A.
Throttle Cable
B.
Throttle Cable Bracket
C.
Clamp
D.
Clamp
E.
Clamp
Note:
Damage to the Throttle Cable may occur, which may cause improper cable adjustment if the technician attempts to remove the
transmission without disconnecting the throttle cable, brackets or the three clamps.