LS 400 V8-4.0L (1UZ-FE) (1990)
6. REMOVE EGR GAS TEMP. SENSOR
-
Remove the EGR gas temp. sensor and gasket from EGR valve adapter.
INSTALLATION OF EGR GAS TEMP. SENSOR
1. INSTALL EGR GAS TEMP. SENSOR
-
Install the EGR gas temp. sensor and new gasket to EGR valve adapter.
2. INSTALL EGR ADAPTER
(a) Install a new gasket to the air intake chamber.
(b) Connect the connector.
(c) Install the EGR valve adapter to the air intake chamber with the two bolts and two nuts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
3. INSTALL EGR VALVE
(a) Install a new gasket to the EGR valve adapter.
(b) Install the EGR valve to the EGR valve adapter with the two nuts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf.)