LS 400 V8-4.0L (1UZ-FE) (1990)
9. REMOVE VSV FOR EVAP SYSTEM
Remove the two bolts, and disconnect the VSV from cylinder head an timing belt cover.
10. REMOVE RH NO. 3 TIMING BELT COVER
Remove the three bolts and timing belt cover.
11 REMOVE LH NO. 3 TIMING BELT COVER
(a) Remove the four mounting bolts.
(b) Disconnect the cord grommet from the timing belt cover, and remove the timing belt cover.
(c) Remove the cord grommet from the high-tension cord.
12. REMOVE LOWER HIGH-TENSION CORD COVER
(a) Disconnect the high-tension cord from the RH ignition coil.
(b) Disconnect the high-tension cords from the high tension cord cover.