LS 400 V8-4.0L (1UZ-FE) (1990)
(b) Remove the two bolts and remove the actuator.
8. REMOVE FRONT PNEUMATIC CYLINDER
Remove the three nuts and remove the pneumatic cylinder and suspension support from the vehicle.
DISPOSAL OF FRONT PNEUMATIC CYLINDER
1. REMOVE AIR FROM INSIDE CYLINDER
Using a screwdriver, etc. remove the air from inside the cylinder.
2. MAKE A HOLE IN SHOCK ABSORBER AND REMOVE GAS
(a) Fully extend the pneumatic cylinder.
(b) Using a drill, make a hole in the cylinder as shown to remove the gas inside.