LS 400 V8-4.0L (1UZ-FE) (1990)
/Page-1110005.png)
CAUTION: The gas coming out is harmless, but be careful of chips which may fly up when drilling.
INSTALLATION OF FRONT PNEUMATIC CYLINDER
1. INSTALL PNEUMATIC CYLINDER TO VEHICLE
Install pneumatic cylinder to vehicle with the suspension support and three nuts.
Torque: 36 Nm (370 kgf.cm, 27 ft lbf)
2. INSTALL SUSPENSION CONTROL ACTUATOR
(a) Match the rods of the pneumatic cylinder with the holes in the suspension control actuator.
(b) Install the actuator using two bolts.
