LS 400 V8-4.0L (1UZ-FE) (1990)
Ride Control Solenoid Valve: Service and Repair
Fig. 74 Pneumatic Cylinder & Related Components
Removal
1.
Refer to Fig. 74 when replacing pneumatic cylinder.
2.
Move height control switch in luggage compartment to Off position.
3.
Raise and support vehicle, then remove wheel and tire assembly.
4.
Remove rear seat cushion, rear seat back, right and left rear scuff plates, right and left roof side inner garnishes, package tray trim and luggage
compartment trim.
5.
Disconnect both stabilizer links at stabilizer bar.