LS 400 V8-4.0L (1UZ-FE) (1990)
Suspension Strut / Shock Absorber: Service and Repair
Rear
Fig. 70 Shock Absorber & Related Components
Removal
1.
Refer to Fig. 70 when replacing shock absorbers.
2.
Raise and support vehicle, then remove wheel and tire assembly.
3.
Remove rear seat cushion, rear seat back, right and left rear scuff plates, right and left roof side inner garnishes and package tray trim.
4.
Remove rear driveshaft as outlined under TRANSMISSIONS CLUTCHES DIFFERENTIALS AXLES AND DRIVE SHAFTS/AXLES,
DRIVE SHAFTS/COMPONENT R & R/REAR DRIVESHAFT.
5.
Disconnect both stabilizer links at stabilizer bar.