LS 400 V8-4.0L (1UZ-FE) (1990)
/Page-1123004.png)
(b) Using a chisel and hammer, release the nut caulking.
(c) Install the disc rotor to the axle hub. Install the brake cylinder with two bolts to the steering knuckle.
Torque: 1,200kg-cm (87 ft-lb, 118 Nm)
(d) While applying the brakes, loosen the nut.
HINT: Remove the brake cylinder and disc rotor.
8. REMOVE STEERING KNUCKLE FROM LOWER BALL JOINT
Remove the two bolts and remove the steering knuckle from the lower ball joint.
9. REMOVE STEERING KNUCKLE FROM UPPER BALL JOINT
(a) Release the clip and remove the nut.
