LS 400 V8-4.0L (1UZ-FE) (1990)
4. INSTALL SPEED SENSOR ROTOR
NOTICE: Do not scratch the serrations of the speed sensor rotor.
5. TEMPORARILY TIGHTEN NUT
Install a new nut to the axle hub and temporarily tighten it by hand.
HINT: After installing the steering knuckle to the vehicle, tighten the nut to the specified torque.
INSTALLATION OF STEERING KNUCKLE WITH AXLE HUB
1. INSTALL STEERING KNUCKLE
(a) Install steering knuckle to lower ball joint and temporarily tighten the two bolts.
(b) Install steering knuckle to upper arm and torque the nut.
Torque: 660 kg-cm (48 ft-lb, 65 Nm)