LS 400 V8-4.0L (1UZ-FE) (1990)
4. INSPECT SPIDER BEARING
(a) Check if the spider bearing rotates smoothly.
(b) Check if there is any play in the spider bearing. If necessary. replace the propeller shaft.
5. INSTALL CENTER SUPPORT BEARING
(a) Using SST and a press, install the center support bearing. SST 09330-50010
(b) Using SST and a press, install a new dust deflector. SST 09330-50010
(c) Using a snap ring expander, install the snap ring.
6. ASSEMBLE INTERMEDIATE SHAFT AND PROPELLER SHAFT
(a) Install the dust boot.