LS 400 V8-4.0L (1UZ-FE) (1990)
Axle Shaft: Service and Repair
Rear
Fig. 98 Exploded View Of Rear Driveshaft Components
Removal
1.
Refer to Fig. 98 when replacing rear driveshafts.
2.
Raise and support vehicle, then remove wheel and tire assemblies.
3.
Remove cotter pin, locknut cap and locknut.
4.
When removing righthand side driveshaft, it will be necessary to remove the O-ring style exhaust hangers and support tail pipe with wire.
Fig. 99 Removing Height Control Sensor
Fig. 100 Removing Driveshaft Mounting Bolts