LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-2091016.png)
a. Put protective tape around the front door scuff plate.
b. Using a moulding remover, detach the 4 clips.
c. Detach the 7 claws and remove the front door scuff plate.
7. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedures described for the LH side.
8. REMOVE COWL SIDE TRIM BOARD LH
a. Detach the 3 claws and remove the cowl side trim board.
9. REMOVE COWL SIDE TRIM BOARD RH
HINT: Use the same procedures described for the LH side.
10. REMOVE FRONT PILLAR GARNISH LH
