LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-2091025.png)
44. REMOVE ROOF DRIP SIDE FINISH MOULDING CENTER LH
a. Remove the roof drip side finish moulding center.
45. REMOVE ROOF DRIP SIDE FINISH MOULDING CENTER RH
a. Remove the roof drip side finish moulding center.
46. REMOVE INNER REAR VIEW MIRROR COVER (w/o Rain Sensor)
47. REMOVE RAIN SENSOR COVER (w/ Rain Sensor)
48. DISCONNECT RAIN SENSOR CONNECTOR (w/ Rain Sensor)
49. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
50. REMOVE WINDSHIELD OUTSIDE MOULDING UPPER
51. REMOVE WINDSHIELD GLASS
52. REMOVE NO. 2 WINDSHIELD GLASS STOPPER
53. REMOVE WINDSHIELD GLASS RETAINER
54. REMOVE WINDSHIELD GLASS ADHESIVE DAM
55. REMOVE WINDSHIELD GLASS SEAL
56. CLEAN WINDSHIELD GLASS
57. REMOVE NO. 1 WINDSHIELD GLASS STOPPER
58. CLEAN VEHICLE BODY
59. REMOVE ROOF HEADLINING ASSEMBLY
a. Disconnect the roof wire connector and detach each clamp from the front pillar.
b. for Standard Type:
Detach the hook, 12 claws, 3 fasteners and 4 clips.
