LS 460 V8-4.6L (1UR-FSE) (2007)
2. Attach the NEW EPT foam on the front door belt molding (refer to 2 in Figure 23).
3. Replace existing foam (refer to 4 and 5 in Figure 23).
A. Remove the original EPT foam (refer to 4 and 5 in Figure 23) and replace with NEW EPT foam (from the repair kit) as shown above.
NEW EPT Foam Dimensions: 5 x 10 x 142 mm (0.20 x 0.40 x 5.6 in.).
Make sure there is NO gap between the NEW foam and existing foam (refer to 4, 5, and 6 in Figure 23).
B. Attach and replace sponge sealer on front door belt molding (Figure 24 shows proper placement of the new sponge sealers).