LS 460 V8-46L (1UR-FSE) (2007) Front Door Weatherstrip Component Information
2. Remove the Front Door No.2 Weatherstrip.
Carefully remove the No.2 door seal.
HINT
Double-sided tape is used to retain the door seal at the front edge of the door.
Front Door No.2 Weatherstrip Installation
1. Clean the front door surface.
Remove and clean any of the remaining double-sided tape and adhesive residue from the door.
2. Install the NEW Front Door No.2 Weatherstrip.
A. Remove the protective strip from the adhesive tape.
B. Install the No.2 door seal ensuring that the seal lips engage into the door frame.
C. Reinstall the clip.
3. Check door and door closer for proper operation.