LS 460 V8-4.6L (1UR-FSE) (2007)
^
2007 model year LS 460:
Vehicle Interior - Door/Hatch - "Front Door Lock: Installation"
^
2008 model year LS 460:
Vehicle Interior - Door/Hatch - "Front Door Lock: Installation"
2. Reset the radio presets and clock.
3. Test drive the vehicle to confirm that the noise is improved.
Repair Procedure Assembly Hints
NOTE
These hints only apply to vehicles that received the foam repairs (2007 model year vehicles produced BEFORE the Production Change VIN shown
in the Production Change Information table).
During assembly be aware of the following areas where care MUST be taken.
1. When installing the chrome belt molding assembly be sure to engage the tabs at the front and rear lower glass runs correctly.
HINT
Start by engaging the rear tab and then the front.