LS 460 V8-4.6L (1UR-FSE) (2007)
5. Confirm the conditions listed on Techstream and press "Next".
6. STOP - DO NOT turn the ignition OFF as instructed by Techstream. Press "Next" - DO NOT PRESS "Exit".
Section 3: Front Brake Bleed - Manual Process
NOTE
^
Keep doors closed during bleeding.
^
Ignition must be ON before starting this procedure.
1
Connect a clear vinyl tube to the FR (Front Right) bleeder screw.
2. Pump and hold pressure on the brake pedal while an assistant opens the bleeder screw.
NOTE
Make sure fluid level in reservoir does NOT fall below the low mark during this procedure.