LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-584001.png)
Camshaft Bearing: Specifications
CAMSHAFT BEARING CAP (for Bank 1)
Install the 12 bolts in the order shown in the illustration.
Torque ...................................................................................................................................................... 10 N*m (102 kgf*cm, 7 ft.*lbf) for bolt A
Torque ......................................................................................................................................... 30 N*m (306 kgf*cm, 22 ft.*lbf) for except bolt A
Tighten the 8 bolts in the order shown in the illustration.
Torque ..................................................................................................................................................................... 16 N*m (163 kgf*cm, 12 ft.*lbf)
CAMSHAFT BEARING CAP (for Bank 2)
Install the 12 bolts in the order shown in the illustration.
Torque ...................................................................................................................................................... 10 N*m (102 kgf*cm, 7 ft.*lbf) for bolt A
Torque ......................................................................................................................................... 30 N*m (306 kgf*cm, 22 ft.*lbf) for except bolt A
