LS 460 V8-4.6L (1UR-FSE) (2007)
Cabin Temperature Sensor / Switch: Service and Repair
Room Temperature Sensor (For Front Side)
Room Temperature Sensor (For Front Side)
ROOM TEMPERATURE SENSOR (for Front Side)
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE INSTRUMENT SIDE PANEL LH
4. REMOVE NO. 1 INSTRUMENT CLUSTER MOULDING
5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
6. REMOVE ROOM TEMPERATURE SENSOR