LS 460 V8-4.6L (1UR-FSE) (2007)
Integration Control And Panel (For Front Side)
INTEGRATION CONTROL AND PANEL (for Front Side)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
5. REMOVE NO. 3 BOX PANEL
6. REMOVE REAR CONSOLE PANEL UPPER
7. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
8. REMOVE RADIO RECEIVER ASSEMBLY
9. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY WITH BRACKET
a. Remove the 2 bolts.