LS 460 V8-4.6L (1UR-FSE) (2007)
a. Sufficiently apply compressor oil to 4 new O-rings and the fitting surface of the hose joint.
Compressor oil: ND-OIL 8 or equivalent
b. Install the 2 O-rings to the cooler evaporator.
c. Install the 2 O-rings to the tube and accessory.
d. Install the cooler expansion valve and tube and accessory to the evaporator.
e. Using a 4 mm hexagon wrench, install the 2 hexagon bolts.
Torque: 3.5 N.m (35 kgf.cm, 30 in.lbf)
f.
Install the plate with the 3 screws.
g. Install the new packing and butyl tape.
3. INSTALL WIRING AIR CONDITIONING HARNESS
a. Install the harness, as shown in the illustration.
4. INSTALL DRAIN HOSE