LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-2415002.png)
4. REMOVE COOL AIR INTAKE DUCT SEAL
5. REMOVE HIGH PITCHED HORN ASSEMBLY
a. Remove the bolt and horn.
b. Disconnect the horn connector.
INSTALLATION
1. INSTALL HIGH PITCHED HORN ASSEMBLY
a. Connect the horn connector.
b. Install the horn with the bolt.
Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
2. INSTALL COOL AIR INTAKE DUCT SEAL
3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
4. INSTALL ENGINE ROOM SIDE COVER LH
5. INSTALL ENGINE ROOM SIDE COVER RH
