LS 460 V8-4.6L (1UR-FSE) (2007)
Fluid - A/T: Service and Repair
AUTOMATIC TRANSMISSION FLUID
ADJUSTMENT
1. BEFORE REFILL TRANSMISSION
^
This transmission requires Toyota Genuine ATF WS transmission fluid.
^
After servicing the transmission, you must refill the transmission with the correct amount of fluid.
^
Maintain the vehicle in a horizontal position while adjusting the fluid level.
^
If the entire transmission, transmission pan, drain plug, valve body and/or torque converter is replaced, proceed to the "FILL
TRANSMISSION PAN" procedures.
^
If the transmission hose, extension housing oil seal and/or radiator is replaced and/or a repair of oil leak is performed, proceed to the
"ADJUST FLUID LEVEL" procedures.
2. FILL TRANSMISSION PAN
(a)
Lift the vehicle up while keeping a level state.
(b) Remove the refill plug and overflow plug.
(c)
Fill the transmission through the refill hole until fluid begins to trickle out from the overflow tube.
(d) Reinstall the overflow plug.
3. FILL TRANSMISSION
(a)
Fill the transmission with the amount of fluid listed in the table.
Standard capacity (Part 1)