LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-534001.png)
Maintenance Required Lamp/Indicator: Service and Repair
Without Navigation System
Oil Maintenance Data Reset
After changing the engine oil (if equipped)
1) Switch the display to trip meter A when the engine is running.
2) Turn the engine switch OFF.
3) While pressing the trip meter reset button, set the engine switch to the IG-ON mode (but do not start the engine, otherwise the reset mode will be
canceled). Press and hold the button until the multi-information display indicates the the reset is complete.
