LS 460 V8-4.6L (1UR-FSE) (2007)
(c)
Using SST, disconnect the No. 1 suspension arm from the steering knuckle.
SST 09960-20010 (09961-02010)
NOTICE:
^
Do not damage the dust cover.
^
As the dust cover may be damaged, adjust SST with the center nut so that the body and crow are parallel.
^
Make sure to tie the string of SST to the vehicle to prevent SST from dropping.
8. DISCONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a)
Remove the bolt, and then remove the bracket of the front height control sensor LH.
9. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a)
Remove the 2 nuts and front stabilizer link assembly LH.
HINT: If the stud bolt turns with the nut, use a 6 mm hexagon wrench to hold the stud.