LS 460 V8-4.6L (1UR-FSE) (2007)
7. CONNECT REAR UPPER NO. 2 CONTROL ARM ASSEMBLY LH
(a)
Connect the control arm with a new nut to the axle carrier.
Torque: 160 N*m (1632 kgf*cm, 118 ft.*lbf)
8. CONNECT TOE CONTROL LINK SUB-ASSEMBLY LH
(a)
Connect the control link with a new nut to the axle carrier.
Torque: 118 N*m (1203 kgf*cm, 87 ft.*lbf)
9. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH
(a)
Install the stud of the suspension arm, and temporarily install a washer, nut and the bolt to the axle carrier.
(b) Temporarily install the No. 2 suspension arm with the No. 2 suspension toe adjust plate, rear suspension attachment and nut to the suspension
member.