LS 460 V8-4.6L (1UR-FSE) (2007)
-
Do not damage the fuel suction with pump and gauge tube.
e. Remove the gasket.
INSTALLATION
1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
a. Apply a light coat of gasoline to a new gasket, and install it to the fuel tank.
b. Connect the fuel hose, and set the fuel suction with pump and gauge.
NOTE:
-
Be careful not to bend the arm of the fuel sender gauge.
-
When connecting the fuel hose, do not forcibly pull the hose.
c. Install the set plate with the 8 bolts.
Torque: 6.0 N.m (61 kgf.cm, 53 in.lbf)
HINT: Align the protrusion of the set plate with the cutout of the fuel suction pump and gauge.