LS 460 V8-4.6L (1UR-FSE) (2007)
b. Remove the 2 bolts, 2 nuts and 2 injector drivers with bracket.
NOTE: Be careful not to drop or strike the injector driver.
c. Remove the 8 nuts and 2 injector drivers from the bracket.
INSTALLATION
1. INSTALL INJECTOR DRIVER
NOTE:
-
Be careful not to drop or strike the injector driver.
-
The injector driver is grounded at the bolt and nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of
the injector driver and engine before installing the injector driver.
a. Install the 2 injector drivers to the bracket with the 8 nuts.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
b. Temporarily install the 2 injector drivers (with bracket) with the 2 bolts and 2 nuts.
c. Tighten the 2 bolts and 2 nuts in the order shown in the illustration.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)