LS 460 V8-4.6L (1UR-FSE) (2007)
NOTE:
-
Position the claws of the clamps as shown in the illustration.
-
Install the clips so that they are within the hose's paint marks.
3. INSTALL NO. 1 AIR CLEANER INLET
a. Align the holes with the connection areas labeled A, and attach the No. 1 air cleaner inlet.
b. Install the No. 1 air cleaner inlet with the 2 bolts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. ADD ENGINE COOLANT
6. INSPECT FOR ENGINE COOLANT LEAK
7. INSTALL AIR CLEANER INLET COVER
a. Attach the 4 clips B.
NOTE:
-
Make sure the clips are attached securely.
-
Attaching the clips forcefully or hitting the top of the clips may damage them.
b. Install the air cleaner inlet cover with the 5 clips A.
8. INSTALL V-BANK COVER SUB-ASSEMBLY