LS 460 V8-4.6L (1UR-FSE) (2007)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE NO. 2 ENGINE UNDER COVER
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the crankshaft position sensor connector.
b. Remove the bolt and crankshaft position sensor.
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the crankshaft position sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the crankshaft position sensor connector.
2. INSTALL NO. 2 ENGINE UNDER COVER