LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the engine room ECU cover with the 3 bolts.
Torque:7.8 N.m (80 kgf.cm, 69 in.lbf)
4. INSTALL ENGINE ROOM SIDE COVER LH
5. INSTALL AIR CLEANER INLET COVER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSTALL COWL TOP VENTILATOR LOUVER RH
8. PERFORM RESET MEMORY
NOTE: Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.
HINT: Initialization cannot be completed by only removing the battery.
9. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.