LS 460 V8-4.6L (1UR-FSE) (2007)
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
(b) Align the groove with the neutral basic line.
(c)
Hold the switch in position and tighten the bolt.
Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
(d) After adjustment, perform the on-vehicle inspection.
INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Install the switch to the manual valve shaft.
(b) Temporarily install the bolt.
(c)
Install a new lock washer with the nut.
Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)