LS 460 V8-4.6L (1UR-FSE) (2007)
1.
Turn the ignition switch to the "IG-ON" position, operate the front vertical height switch to the lower side 3 times.
Within 10 seconds, simultaneously operate the seatback angle switch to the rear side and the vertical height adjustment switch to the lower side
until a beep is heard.
2.
Operate the seat position control switch and slide the seat to the rearmost position.
NOTE:
When operating the control switch, the warning buzzer sounds.
After operating the seat position control switch, the following operations will occur automatically:
^
The head restraint automatically moves to the uppermost position and a beep is heard.
^
The seat cushion length automatically slides to the rearmost position and a beep is heard.
HINT:
The two seat operations described above occur simultaneously.
3.
Move the seatback angle switch forward until a beep is heard.