LS 460 V8-4.6L (1UR-FSE) (2007)
e. Using the intelligent tester or Techstream, perform the Active Test for the ABS motor relay (ABS MTR1) and measure the voltage between the
relay inspection terminals of the engine room junction block.
HINT: As the ABS motor relay (ABS MTR1) is a semiconductor relay, there are no operation sounds.
If the result is not as specified, check the harness wires and connectors and replace them as necessary.
If the harness wires and connectors are in good condition, replace the engine room junction block assembly.
2. CHECK ABS MOTOR RELAY (ABS MTR2)
a. Remove the ABS motor relay from the No.3 relay block.