LS 460 V8-4.6L (1UR-FSE) (2007)
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE FRONT DOOR SCUFF PLATE LH
4. REMOVE COWL SIDE TRIM BOARD LH
5. REMOVE DASH PANEL EXTENSION LH
a. Using a clip remover, remove the clip.
b. Disconnect the connector.
c. Remove the 2 nuts and bolt and dash panel extension LH.
6. REMOVE DRIVING SUPPORT ECU
a. Remove the nut and ECU.
NOTE: During the removal and installation, do not remove the drip-proof cover.
INSTALLATION
1. INSTALL DRIVING SUPPORT ECU
a. Install the ECU with the nut.
NOTE:
-
During the removal and installation, do not remove the drip-proof cover.
-
If replacing the ECU, make sure to turn the engine switch from off to on (IG) and back to off.