LS 460 V8-4.6L (1UR-FSE) (2007)
Air Conditioning Amplifier
AIR CONDITIONING AMPLIFIER
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
4. REMOVE INSTRUMENT SIDE PANEL RH
5. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
7. REMOVE INSTRUMENT PANEL LOWER
8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
10. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
a. Disconnect the 3 connectors.
b. Remove the screw and amplifier.
INSTALLATION