LS 460 V8-4.6L (1UR-FSE) (2007)
Cuts, minute cracks or marked discoloration on the driver side knee airbag.
2. CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.
b. With the driver side knee airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
driver side knee airbag with a new one:
-
Cuts, minute cracks or marked discoloration on the driver side knee airbag.
-
Cracks or other damage to the connector.
-
Deformation or cracks on the instrument panel reinforcement.
NOTE: For removal and installation procedures of the driver side knee airbag, be sure to follow the correct procedure.
Front Passenger Airbag Assembly
ON-VEHICLE INSPECTION
1. CHECK FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
instrument panel with a new one:
Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.
2. CHECK FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)