LS 460 V8-4.6L (1UR-FSE) (2007)
a. Disconnect the connector.
b. Remove the bolt and sensor.
INSTALLATION
1. INSTALL SMOG VENTILATION SENSOR
a. Install the sensor with the bolt.
Torque: 9.8 N.m (100 kgf.cm, 7 ft.lbf)
b. Connect the connector.
2. INSTALL COOL AIR INTAKE DUCT SEAL
a. Install the duct seal with the 2 clips.
3. INSTALL AIR CLEANER INLET COVER
a. Install the cover with the 2 clips.
4. INSTALL ENGINE ROOM SIDE COVER LH
a. Install the cover with the 4 clips.
5. INSTALL ENGINE ROOM SIDE COVER RH
a. Install the cover with the 4 clips.