LS 460 V8-4.6L (1UR-FSE) (2007)
Hazard Warning Switch
HAZARD WARNING SWITCH
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER RH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
5. REMOVE SHIFT LEVER KNOB
6. REMOVE NO.3 CONSOLE BOX PANEL
7. REMOVE CONSOLE PANEL UPPER REAR
8. REMOVE CONSOLE PANEL UPPER
9. REMOVE RADIO RECEIVER ASSEMBLY
10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Multi-display)
11. REMOVE MULTI-MEDIA MODULE DISPLAY ASSEMBLY (w/ Multi-display)