LS 460 V8-4.6L (1UR-FSE) (2007)
a. Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST 09224-00010
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1)
a. Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.
SST 09224-00010
Torque: without SST
44 N.m (449 kgf.cm, 32 ft.lbf)
with SST
40 N.m (408 kgf.cm, 30 ft.lbf)
NOTE: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.)
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 2)
a. Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.
SST 09224-00010
Torque:without SST
44 N.m (449 kgf.cm, 32 ft.lbf)
with SST
40 N.m (408 kgf.cm, 30 ft.lbf)