LS 460 V8-4.6L (1UR-FSE) (2007)
Voltage Check
VOLTAGE CHECK
a. Establish conditions in which voltage is present at the check point.
Example:
[A] - Ignition SW on
[B] - Ignition SW and SW 1 on
[C] - Ignition SW, SW 1 and Relay on (SW 2 off)
b. Using a voltmeter, connect the negative lead to a good ground point or negative battery terminal, and the positive lead to the connector or
component terminal.
This check can be done with a test light instead of a voltmeter.
Disconnection of Male and Female Connectors
DISCONNECTION OF MALE AND FEMALE CONNECTORS
To pull apart the connectors, pull on the connector itself, not the wire harness.