LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1403001.png)
Starter Motor: Testing and Inspection
Cranking Holding Function Circuit
Cranking Holding Function Circuit
DESCRIPTION
The cranking holding control system provides current to the starter when the ECM detects the engine switch's start signal (STSW). When the ECM
performs a firing judgment, the system cuts current to the starter. When the ECM receives the STSW signal, it turns on the ST CUT relay, which
prevents flickering of the combination meter, clock, audio system, etc. Also, the ECM sends a signal to the ECM's STAR terminal. Then the STAR
output signal travels through the park/neutral position (PNP) switch to the ST relay, causing the starter to activate.
When the engine is cranking, the starter operation signal is sent to the ECM's STA terminal.
