LS 460 V8-4.6L (1UR-FSE) (2007)
Steering Column Lock: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
DTC CHECK / CLEAR
1. CHECK DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Read the DTCs.
2. CLEAR DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Erase the DTCs.
Without Scan Tool
DTC CHECK / CLEAR
1. CHECK DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Read the DTCs.
2. CLEAR DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Erase the DTCs.
With Manufacturer's Scan Tool
DTC CHECK / CLEAR
1. CHECK DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Read the DTCs.
2. CLEAR DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c)
Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / SMART ACCESS / DTC INFO /
(2) Techstream - Select: Body / Certification ECU / Trouble Codes /
(e)
Erase the DTCs.
Without Scan Tool
DTC CHECK / CLEAR
1. CHECK DTC
(a)
Connect the intelligent tester or Techstream to the DLC3.